 |
|
|
|
|
 |
|
High Current Driver
• Output 0 to 1A
max. Voltage is limited to 20V max.
•
Signals are positive unipolar.
• Any
load is acceptable and should not damage the circuit;
however, inductive loads and loads below 10 ohm
are not recommended.
• Output accuracy is to within ±10%.
Low Voltage Driver
• Output 0 to 20V
max. Current is limited to 2A max.
•
Signals are positive unipolar.
• Any load is acceptable and should not damage
the circuit; however, short-circuiting the output
is not recommended.
• Output accuracy is to within ±5%.
High Voltage Driver
• Output 0 to 200V
max. Current is limited to 100mA max.
•
Signals are positive unipolar.
• Any load is acceptable and should not damage
the circuit; however, short-circuiting the output
is not recommended.
• Output accuracy is to within ±5%.
Graphical User Interface
• Freehand
waveform editing.
• User-generated
and predefined waveform library.
• Integrated help files.
Product Design
• Rack-mounted equipment.
• The monitor sits on top of the unit; the
keyboard tray slides forward.
Product Dimensions: 41" high x 21"
wide x 25" deep (104 cm x 53 cm x 64 cm).
Operating Requirements:
120 VAC, 800 W. |
|
|
| © Copyright
2006. Zyvex Corporation. All Rights
Reserved. |
|
|
|
|
|
|
|
 |
|
